How to clean your automobile using a pressure washer. Some individuals like maintaining the appearance of their vehicles and are ready to devote time to cleaning and waxing the outside and detailing the interior. On the other hand, car washing may seem like a boring chore in an already hectic schedule, and you may be willing to devote no more than 10 minutes to cleaning your vehicle at an automatic car wash.
Using a pressure washer is an excellent and efficient approach for washing the outside of your car, whether you’re a car enthusiast who washes your vehicle regularly or someone who just needs the job done fast. We’ve covered all you need to know to operate a pressure washer, and it’s simpler than you may think.
Step 1: Select the proper pressure washer and nozzle
It is essential to use a pressure washer with the proper PSI (pounds per square inch) and water flow while cleaning your automobile (GPM: gallons per minute). The more the PSI, the greater the water pressure at the tip of the washer. The washer will discharge more water as GPM increases.
Cleaning Units describe the combination of pressure and water that a pressure washer can generate. This is proven by the following equation:
PSI x GPM = Units of Cleaning
1500 PSI times 2 GPM equals 3000 cleaning units
Using a power washer to clean a vehicle needs between 1,900 and 2,800 cleaning units. Pressure washers are far more efficient and utilize less water than garden hoses.
There are both electric and gas-powered pressure washers available for purchase. In general, gas pressure washers have a greater cleaning capacity and are too powerful for minor tasks, such as washing a vehicle. To avoid harming your car, it is preferable to use an electric pressure washer with the correct PSI setting.
There are several sorts of nozzles from which to pick. It is essential to use the optimum size in order to efficiently clean your vehicle without damaging the paint. When selecting a pressure washer for your automobile, there are two aspects to consider: pressure level and nozzle size.
Select a pressure washer with the right degree of pressure.
Choose a pressure washer with a PSI range between 1200 and 1900. It is safe for use on automobiles, so you need not worry about harming the paint on your vehicle. The recommended GPM range for a pressure washer is between 1.4 and 1.6.
Select the correct nozzles
There are several sizes of nozzles available for use with pressure washers. Choose the proper size so that water may be uniformly and readily spread throughout the car’s surface for optimal cleaning techniques.
Narrow pressure washer nozzles cover a smaller surface area but require greater pressure. Wider tips cover a greater area while applying less force.
Step 2: Park the vehicle in a suitable area for cleaning
It is essential to park your vehicle in an open area, away from other vehicles or items that you don’t want to become wet or damaged by water. A wide driveway or roadway is advised. If you are using an electric pressure washer, you must have access to an outlet in order to power it.
Not all electric pressure washers are compatible with extension cables. Ensure that you are close enough to an electrical outlet to utilize your washer properly.
Step 3: Rinse the vehicle
Before putting any type of cleaner on your vehicle, make sure to rinse it and remove any dirt or other debris that has adhered to the surface. After testing the pressure washer at a distance of 4 to 5 feet from the vehicle, it is advisable to go closer. Ensure that all windows are rolled up and that the car doors and trunk are closed to prevent water from entering the car.
clean your automobile using a pressure washer
Before washing the vehicle, test the water pressure by spraying water from the washer onto the ground. When utilizing a car washer, attempt to jet water down onto the vehicle’s surface.
25 degree tip
Using these supplies, follow the four procedures below to rinse your vehicle:
Connect your pressure washer to an electrical outlet.
Connect the pressure washer to a water source.
Attach the 25-degree tip to the nozzle of the washer.
Turn on your pressure washer and spray the car’s whole exterior with water.
Be careful to rinse the wheels as well as the car’s complete exterior. To ensure that you remove all of the dirt and grime off the hubcaps, you may need to rinse the tires closely.
Step 4: Apply cleaner to the vehicle
The majority of pressure washers feature designated spaces for cleaning chemicals. Utilize a cleaning agent that is developed for use with pressure washers.
Before applying them to an automobile, detergents must be diluted with water because they are sold as concentrations.
Detergent (1 quart)
The following three stages describe how to apply pressure-wash detergents most effectively:
In the bucket, combine detergent and water to dilute the detergent concentrate with water.
Follow the detergent manufacturer’s recommendations for the water-to-concentrate ratio.
Fill the diluted detergent into the pressure washer’s detergent tank.
Be careful to adjust the pressure washer’s setting so that detergent, not water, is sprayed onto the vehicle. If there is no detergent tank, detergent should be applied by hand using a cloth.
Spray the cleaner onto your vehicle.
Start with the car’s roof and work your way down. You may opt to wash simply one side at a time or the entire vehicle simultaneously.
Allow the detergent to sit on the vehicle for approximately five minutes.
Step 5: Rinse detergent off the automobile.
Using a 40-degree tip, rinse the vehicle clean of detergent. Holding the washer at a 45-degree angle and rinsing downward from the top of the vehicle is a smart idea.
Follow these 3 steps to successfully remove detergent from your vehicle.
Change the washer’s tip to the 40-degree tip.
Change the detergent tank’s output method to your water source.
Rinse away the detergent.
Depending on personal desire, a towel or soft cloth may be used to dry the automobile once detergent has been removed.
You have now successfully learned to clean your automobile using a pressure washer, enhancing its look while conserving time and water. Regular washing with a pressure washer is a quick and effective approach to increase the aesthetic attractiveness of your vehicle and extend the life of its paint finish. Follow these instructions each time you wash your automobile to maintain its pristine appearance. Contact Waterboyz if you would like more tips or advice on pressure washing your automobile.